外弹道测量的定位误差对测速折射修正的影响

考虑了在外弹道测量中由于定位的测量误差（主要指常值误差）而带来的测速折射修正的误差。从折射修正的原理出发，推导了该项误差的表现形式。理论分析与仿真计算表明，在高准确度测量定轨中该项误差是不能忽略的。给出了扣除该误差的方法，以利于在数据处理中来消除该项误差，从而可提高定轨的准确度。     

飞机电气系统参数测试标准实施中问题分析

结合本标准宣贯、研讨会上所提供的信息,分析了飞机电气系统参数测试标准在实际应用中存在的一些问题,并对瞬态电压和频率调制率等重点问题进行了详细的讨论和分析.     

多功能水冷壁排管爬壁机器人的研制

介绍了一种新研制开发的永磁吸附式双履带结构爬壁机器人，主要应用于火力发电站的大型排管锅炉中的水冷壁排管壁面的清扫和检测，并能够在检测到壁面厚度小于预置的极限值处发出报警信号、打标记，具有较高的推广应用价值。文中阐述了该机器人的结构、磁路的优化设计、自动测厚、打标系统和控制系统的研制。目前，该机器人已经经过多次现场试验。各项指标均已达到设计要求。     

Capillary flow rate limitation in asymmetry open channel

This paper focuses on the stability of capillary forced flow.In space,open capillary channels are widely used as the liquid and gas separation devices to manage liquid positioning and transportation.Surface collapse happens when the flow rate exceeds the critical value,leading to a failure of propellant management.Knowledge of flow rate limitation is of great significance in design and optimization of propellant management devices(PMDs).However,the capillary flow rate limitation in an asymmetry channel has not been studied yet in the literature.In this paper,by introducing an equivalent angle to convert the asymmetry corner to a symmetry one,the one-dimensional theoretical model is developed.The flow rate limitation can then be investigated as a function of the channel geometry as well as liquid property based on the model.Comparisons between the asymmetry and symmetry channels bring forth the characteristics of the two kinds of channels,and demonstrate good accordance between the new advanced model and the existing one in the literature.This theoretical model can provide valuable reference for PMD designers.     

端壁抽吸对压气机叶栅间隙泄漏流控制策略的研究

为了研究压气机机匣端壁抽吸对间隙泄漏流动控制的可行性和有效性,以高负荷压气机叶栅为研究对象,通过数值模拟方法对不同抽吸位置和抽吸流量率控制参数下的计算工况进行了对比和分析。研究结果表明:端壁抽吸可以直接地影响叶尖泄漏流的结构形态和存在形式,减弱叶尖泄漏流的强度和影响范围,进而提升压气机叶栅的性能;当抽吸槽覆盖范围包含叶尖泄漏流形成位置及稍靠后附近区域时,所对应的抽吸方案具有较好的控制效果,在0°攻角和0.5%的抽吸流量条件下前槽抽吸和中槽抽吸分别可获得7.04%和7.76%的叶栅总压损失增益;并且进一步研究发现端壁抽吸流量率存在上临界值,应针对不同攻角工况,在其相应的临界值范围内选择合理的抽吸流量,以达到用较小的吸气量实现对间隙泄漏流的控制。     

基于试验设计-遗传算法的船用柴油机冷却系统多目标优化

为了获取某型船用柴油机冷却系统的最佳运行参数,在柴油机可靠运行的前提下,尽量提升动力性和经济性。建立了柴油机工作过程-燃烧室-冷却系统耦合仿真模型,提出试验设计-遗传算法优化算法,该算法具备节省试验成本和多目标全局寻优的优势,选取柴油机的6个典型推进工况点进行研究,采用该算法对冷却系统运行参数开展多目标优化设计,优化设计以海、淡水泵转速为变量因子,以提升动力性参数和经济性参数为目标,以涡前排温、淡水出机温度和峰值缸压为约束条件,优化后,在低负荷点,淡、海水泵节省功耗79.4%、71.73%,扭矩提升7.2%,有效功率提升7.6%,热效率提升8%,耗油率降低6.73%,摩擦功降低9.71%,峰值缸压降低5%。研究结果表明：耦合仿真模型与实机更加贴近;试验设计-遗传算法在解决强耦合、非线性系统的多目标优化问题具备成本低、效率高、精度高的优点。     

共轴式直升机桨毂阻力特性与减阻试验

共轴式直升机桨毂阻力占全机废阻的50%以上,因此有必要对桨毂阻力特性和减阻设计进行研究。 通过对某共轴式直升机桨毂模型、减阻方案及减阻方案加装涡流发生器进行风洞试验,研究轴式直升机桨毂的 阻力特性,验证减阻方案及减阻方案加装涡流发生器的减阻效果。结果表明:桨毂支臂方位角、转速和攻角变 化对桨毂及其减阻方案的阻力影响很小;上下桨毂整流罩与中间轴整流罩之间的缝隙对阻力影响比较大;减阻 方案可以降低约33%的桨毂阻力,而加装涡流发生器的减阻效果并不明显。     

测定电离复合速率常数的激波管方法

发展了测定电离复合速率常数的一种新的激波管方法。在这一方法中使用反射激波加热预混气体使之电离,相继用可控制的强稀疏波使之快速冷却,冷却速度很快,可达106K/s, 使之在冷却过程中,电离远离平衡态。用压电传感器和Langmuir 探针监测状态变化历程和离子浓度,并可获得过程中所有的状态参数。测定了NO e 电离复合速率常数。实验表明这一方法简易可靠     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

基于神经网络模型的襟翼主动控制旋翼减振分析

基于径向基函数(Radial basis function,RBF)神经网络构建了一种带后缘襟翼主动控制(Active controlled flap,ACF)的旋翼振动载荷计算模型。采用正交试验方法确立RBF网络训练样本的输入,在CAMRAD II中计算前飞状态下与训练样本对应的旋翼桨毂六力素,并将主通过频率下的分量作为样本输出,对RBF网络进行离线训练。在此基础上采用多周控制器对被控模型进行振动载荷主动控制。随后以2桨叶4m直径ACF旋翼为例,构建了其桨毂减振分析方法,并对桨毂动载荷各分量的减振效果进行了分析。研究表明,采用正交样本训练的RBF网络能够精确映射襟翼偏角与桨毂振动载荷的非线性关系,施加多周控制后,桨毂垂向振动载荷降低接近50%,其他方向的振动载荷也有不同程度的降低。